Barco ClickShare Rack Mount Kit

Barco ClickShare on 1U in the 19 inch rack

The ClickShare Rack Mount Kit “UM-BAO-201” is specifically designed to hold two ClickShare base units on 1U (rack unit) in a 19 inch rack. The C-5, C-10, CX-20 and CX-30 models are fully supported. Since all Clickshare base units have the same dimensions, it is also possible to mount different product combinations.

All connections of the ClickShares are led to the front of the rack mount kit via a cable/keystone combination. The connectors are equipped with blind covers as standard. Cables are not included. We chose to do this so that everyone can configure exactly what they really need, and save money in the process. The network connectors and cables can also be shielded if desired.

The ClichShares are attached to the rack mounting kit with Velcro and are ready to use after attaching the four rack mounting screws (included). After mounting, the ClichShares protrude 20 mm from the rack mount kit.

The rack mount kit is equipped with various hole patterns to allow for easy cable management. For this purpose, cable ties in various lengths are included with each product.

Optionally you can configure a “Rail System“ to extend the Rack Mount Kit by 200 mm or cover a free slot temporarily / permanently with our “Slot Cover“.