Insert D – Raspberry Pi “one slot”
The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).
The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).
With the „Insert D“ you can mount one Pi in one of our modular Raspberry Pi Rackmount Kits.
- For mounting one Raspberry Pi
- Occupies one slot
zr-sbc-904
Supported Models:
UM-SBC-207
UM-SBC-211
UM-SBC-308
Material: Steel
Color: Black RAL 9005
Dimensions*: 31 x 82 x 89 mm
*) Dimensions = width/height/depth
Price:
With the „Insert D“ you can mount one Pi in one of our modular Raspberry Pi Rackmount Kits.
- For mounting one Raspberry Pi
- Occupies one slot
Available build space for Raspberry Pi add-on boards
If you are toying with the idea of accommodating additional boards such as PoE-HAT or UPS in the rack, you will find the available scope below.
Insert D:
From the lower edge of the circuit board to the lower edge of the slot, you have 25.2mm available.
- PoE-HAT: There is 4mm space from the fan screw head to the lower edge of the slot.
- USV: There is 2mm space between the top edge of the GPIO pins and the bottom edge of the slot.
Insert E, F:
From the lower edge of the circuit board to the lower edge of the slot, you have 56.4mm available.
- PoE-HAT: There is 27.2mm space from the fan screw head to the lower edge of the slot.
- USV: There is 25.2mm space between the top edge of the GPIO pins and the bottom edge of the slot.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.