Netgate 4100 / 6100 Rackmount Kit | 19 inch | 1.33U

19″ Rack Mount Kit for Netgate 4100 and 6100 – NM-NTG-002

Rack Mount Kit “NM-NTG-002″ allows you to mount your Netgate 4100 and 6100 cleanly in the 19” rack.
Duo the inverted installation and a keystone + cable combination for the two USB 3.0. All connections are conveniently accesable on the front of the rack mount.
This makes further wiring in the rack much easier.

At the right end of the rack mount the power supply can be mounted.
The power cable is routed next to the Netgate through a small cutout extension on the front of the rack mount kit.

The Netgate 4100 and 6100 are mounted securely and non-slip on the rack mount kit using a special Strap System. Without using screws or other aids acting on the device.
The straps are fixed with high-quality Velcro. In combination with our spacer, a sufficient distance is created between the Velcro and the Netgate to prevent damage to the housing.
This also prevents a possible loss of warranty.

Cutouts on the bottom and side surfaces of the rack mount kit ensure sufficient cooling in the system.
Even after attachment to the rack mount kit, the outlets are not covered by our screwless Strap System.

Optionally, you can use the “LED Light Guide Set” to view the various status indicators of your Netgate on the front of the rack mount.
A front foil labels each connector and LED and gives the Netgate 4100 rack mount / Netgate 6100 rack mount a unique look.
“NM-NTG-002″ occupies 1.33U.