Filter
Manufacturer
Product model
Rack Unit
Rack
Show
Minisforum
Features of our Minisforum Rack Mounts
Assembly of my Minisforum Rackmount Kit
The Minisforum is attached to the rackmount kit using Velcro straps. So no screws are necessary and you don’t have to unscrew your device. The rackmount kit comes fully assembled and ready for use.
All rackmount kits are designed to support good air circulation. Using our self-developed spacers in combination with the Velcro straps, the Minisforum is mounted in such a way that the existing ventilation openings are not affected. This allows us to achieve a time-saving and device-friendly assembly solution.
Air System
Cutouts for air circulation are provided at the points where the Minisforum and its power supply unit are mounted and bring sufficient cooling in your system.
Rail System
With the rail system you can easily extend the Minisforum by 200 mm or 300 mm. The fully extendable telescopic rails allows for easy access and makes commissioning and maintenance work on the device much easier.
Strap System
The Minisforum is attached to our rackmount kits in a screwless, secure and non-slip manner using a special strap system, without screws or other aids affecting the device. To avoid damage to the housing, the straps are fixed with high-quality Velcro. This also prevents a possible loss of warranty.
Socket Management
Using a high-quality Keystone inline coupler and cable combination, we bring the Minisforum connectors from the back to the front of the rack mounting kit. The keystones are installed flush and make further cabling in the rack much easier. Each socket is labeled with a front foil.
Scope of supply
All Minisforum rack mount kits have the following as standard included in the scope of supply.
- – Rack Mount Screw Set
- – Cable Tie 100mm
- – Cable Tie 300mm
- – Velcro Strap
- – Product Data Sheet
- – Assembly Instructions
Minisforum Rackmount Kit accessories
In order to tailor your Minisforum rackmount kit set to your individual needs, a configurator with a large selection and many combination options is available on each product page.
Our Minisforum Rack Mount Kits
What is the right Minisforum Rack Mount Kit for me?
We currently offer Minisforum Rack Mount Kits, all supporting:
- – Minisforum MS-01 Work Station
- – Minisforum UM790 Pro
- – Minisforum UM890 Pro
- – Minisforum UM680 Slim
- – Minisforum UM690 Slim
- – Minisforum UM760 Slim
- – Minisforum UM870 Slim
1.33U Minisforum Rack Mount for 19″ racks
The following Minisforum rackmount kits are specifically designed and developed for installation in a 19″ rack on 1.33U.
UM-MIN-201
This Minisforum Rack Mount Kit is specially designed for mounting two Minisforum MS-01 Work Station with power supplies on 1.33U in a 19″ rack. The Minisforum PCs can be mounted in either directions. Ports face forward or power switch faces front. Optionally, you can configure a “Rail System” to extend the rack mount kit by 200 mm, or cover a free slot temporarily / permanently with our “Slot Cover”.
UM-MIN-202
This Minisforum Rack Mount Kit is specially designed for mounting two Minisforum UM790 Pro, UM680 Slim, UM690 Slim, UM760 Slim or UM870 Slim with power supplies on 1.33U in a 19″ rack. The Minisforum PCs can be mounted in either directions. Ports face forward or power switch faces front. Six connectors per Minisforum can be routed to the front of the rackmount kit via a cable and keystone combination. Connectors come standard with blind covers and can be configured to match your needs. Optionally, you can configure a “Rail System” to extend the rack mount kit by 200 mm, or cover a free slot temporarily / permanently with our “Slot Cover”.
1.66U Minisforum Rack Mount for 19″ racks
The following Minisforum rackmount kits are specifically designed and developed for installation in a 19″ rack on 1.66U.
UM-MIN-203
This Minisforum Rack Mount Kit is specially designed for mounting two Minisforum UM890 Pro with power supplies on 1.66U in a 19″ rack. The Minisforum PCs can be mounted in either directions. Ports face forward or power switch faces front. Six connectors per UM890 Pro can be routed to the front of the rackmount kit via a cable and keystone combination. Connectors come standard with blind covers and can be configured to match your needs. Optionally, you can configure a “Rail System” to extend the rack mount kit by 200 mm, or cover a free slot temporarily / permanently with our “Slot Cover”.
