HP
Features of our HP Rack Mounts
Assembly of my HP Rackmount Kit
The HP is attached to the rackmount kit using Velcro straps. So no screws are necessary and you don’t have to unscrew your device. The rackmount kit comes fully assembled and ready for use.
All rackmount kits are designed to support good air circulation. Using our self-developed spacers in combination with the Velcro straps, the HP is mounted in such a way that the existing ventilation openings are not affected. This allows us to achieve a time-saving and device-friendly assembly solution.
Air System
Cutouts for air circulation are provided at the points where the HP and its power supply unit are mounted and bring sufficient cooling in your system.
Rail System
With the rail system you can easily extend the HP by 200 mm. The fully extendable telescopic rails allows for easy access and makes commissioning and maintenance work on the device much easier.
Strap System
The HP is attached to our rackmount kits in a screwless, secure and non-slip manner using a special strap system, without screws or other aids affecting the device. To avoid damage to the housing, the straps are fixed with high-quality Velcro. This also prevents a possible loss of warranty.
Socket Management
Using a high-quality Keystone inline coupler and cable combination, we bring the HP connectors from the back to the front of the rack mounting kit. The keystones are installed flush and make further cabling in the rack much easier. Each socket is labeled with a front foil.
Scope of supply
All HP rack mount kits have the following as standard included in the scope of supply.
- – Rack Mount Screw Set
- – Cable Tie 100mm
- – Cable Tie 300mm
- – Velcro Strap
- – Product Data Sheet
- – Assembly Instructions
HP Rackmount Kit accessories
In order to tailor your HP rackmount kit set to your individual needs, a configurator with a large selection and many combination options is available on each product page.
Our HP Rack Mount Kits
What is the right HP Rack Mount Kit for me?
We currently offer HP Rackmount Kits, all supporting:
- – HP Elite Mini Series
- – HP EliteDesk Series
- – HP Pro Mini Series
- – HP ProDesk Series
1.00U HP Rack Mount for 19″ racks
The following HP rackmount kits are specifically designed and developed for installation in a 19″ rack on 1.00U.
UM-HPI-201
This HP Rack Mount Kit is designed to mount one HP Elite Mini / EliteDesk / Pro Mini / ProDesk Mini PC with power supply and 10 ports in 19 inch racks on 1.00U. To cover every product type we have made all connections configurable. Choose the connector configuration that fits your Dell product model. Optionally, you can configure a “Rail System” to extend the rack mount kit by 200mm.
UM-HPI-202
This HP Rack Mount Kit is specially designed for mounting two HP Elite Mini / EliteDesk / Pro Mini / ProDesk Mini PCs with power supplies on 1.00U in a 19″ rack. The HP Mini PCs can be mounted in either directions. Ports face forward or power switch faces front. Optionally, you can configure a “Rail System” to extend the rack mount kit by 200 mm, or cover a free slot temporarily / permanently with our “Slot Cover”.
UM-HPI-203
This HPI Rack Mount Kit is specially designed for mounting two HP Elite Mini / EliteDesk / Pro Mini / ProDesk Mini PCs with power supplies on 1.00U with power supply in a 19-inch rack. The P Mini PCs can be mounted in either directions. Ports face forward or power switch faces front. Optionally, you can configure a “Rail System” to extend the rack mounting kit by 300 mm, is attached 4 times in the server cabinet and is suitable for cabinet depths of 400mm to 800mm (these are the minimum and maximum depth from the front posts to the rear ones), or cover a free slot temporarily / permanently with our our “Slot Cover”.