5.25 inch full-height drive bay Rackmount Kit | 2x Slot | 19 inch | 2.33U | Rail System 300mm
The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).
The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).
Mount your 5.25″ full-height drive bays in a 19″ rack
With the Rackmount Kit „UM-BAY-202“ you can mount up to two 5.25 inch full-height drive bays in a 19″ rack. The bays will be screwed to the Rackmount Kit (please use the screws included with your bay).
The “Rail System” extends the rack mounting kit by 300 mm, is attached 4 times in the server cabinet and is suitable for cabinet depths of 400mm to 800mm (these are the minimum and maximum depth from the front posts to the rear ones).
Combine full-height and half-height drive bays
In addition to full-height drive bays, the rackmount kit also provides support for half-height 5.25″ drive bays. This allows you to combine one full-height drive bay with two half-height drive bays, or opt for four half-height drive bays, if needed. Unused drive bay slots can be covered temporarily or permanently with our half-height drive bay “Slot Cover”. The 5.25″ drive bays are not in the scope of supply.
UM-BAY-202
Delivery time: 4-5 days In Stock
Supported Models:
5,25″ full-height drive bays
Rack: 19 inch
Rack Unit: 2.33U
Material: Steel
Color: Black RAL 9005
Dimensions*: 482.6 x 102.6 x 310 mm
*) Dimensions = width/height/depth
Price starting from:
152,64 €
Mount your 5.25″ full-height drive bays in a 19″ rack
With the Rackmount Kit „UM-BAY-202“ you can mount up to two 5.25 inch full-height drive bays in a 19″ rack. The bays will be screwed to the Rackmount Kit (please use the screws included with your bay).
The “Rail System” extends the rack mounting kit by 300 mm, is attached 4 times in the server cabinet and is suitable for cabinet depths of 400mm to 800mm (these are the minimum and maximum depth from the front posts to the rear ones).
Combine full-height and half-height drive bays
In addition to full-height drive bays, the rackmount kit also provides support for half-height 5.25″ drive bays. This allows you to combine one full-height drive bay with two half-height drive bays, or opt for four half-height drive bays, if needed. Unused drive bay slots can be covered temporarily or permanently with our half-height drive bay “Slot Cover”. The 5.25″ drive bays are not in the scope of supply.
Configurator
Configure the Rack Mount Kit according to your requirements here.
Related products
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.